S
Sharp Point
Evening peeps,
Ive been asked to carry out the work on a 7/8 bed new build, now usually when i do new builds the incoming main is never to far from the road, so the builder/s usually deal with that. This job is for a private customer, who has literally built the house himself and i must say its fantastic. Every bedroom has a en-suite ( loo, basin and mains thermo shower) there is a master bathroom ( bidet, wc, basin and bath)
The house has block n beam on ground and first floor, 2 bedrooms in the attic, UFH throughout every floor, Unvented hot water, secondary hot water and ground source ( slinky's already installed in his fields)
Right, the new dwelling is 165 metres from the road, right next to the old farmhouse they're living in at the moment. The farmhouse currently has a piddly 20mm old style mdpe supplying water and the pressure is pants, and yes i've done the obvious checks. He has applied for a new connection with anglian water, who have sent out a pdf form via email to fill in, the custard has filled out the majority, but has asked me to help answer some questions, as i've never completed a form before, i'm a little bit stumped........
Is there a possibility you good folk could help? right here goes....
custard has tick yes to a supply larger than 32mm, then they want to know
1) maximum daily demand in m3 a day- total
2) maximum instantaneous demand litres per second - total
3)on site storage- litres
4)Percentage of daily demand supplied via storage- total / domestic
Is there a rule of thumb for number 1, guesstimated number of wc flushes, cooking, bathing?
There is no instantaneous, its stored hot water for number 2
Is this for hot water or cold water in general? number 3
number 4.......not a clue.
Me and the custard have agreed on a 300 litre unvented hot water cyl ( enough to accomodate his self and wife, children when they come home from uni)
Thanks
Ive been asked to carry out the work on a 7/8 bed new build, now usually when i do new builds the incoming main is never to far from the road, so the builder/s usually deal with that. This job is for a private customer, who has literally built the house himself and i must say its fantastic. Every bedroom has a en-suite ( loo, basin and mains thermo shower) there is a master bathroom ( bidet, wc, basin and bath)
The house has block n beam on ground and first floor, 2 bedrooms in the attic, UFH throughout every floor, Unvented hot water, secondary hot water and ground source ( slinky's already installed in his fields)
Right, the new dwelling is 165 metres from the road, right next to the old farmhouse they're living in at the moment. The farmhouse currently has a piddly 20mm old style mdpe supplying water and the pressure is pants, and yes i've done the obvious checks. He has applied for a new connection with anglian water, who have sent out a pdf form via email to fill in, the custard has filled out the majority, but has asked me to help answer some questions, as i've never completed a form before, i'm a little bit stumped........
Is there a possibility you good folk could help? right here goes....
custard has tick yes to a supply larger than 32mm, then they want to know
1) maximum daily demand in m3 a day- total
2) maximum instantaneous demand litres per second - total
3)on site storage- litres
4)Percentage of daily demand supplied via storage- total / domestic
Is there a rule of thumb for number 1, guesstimated number of wc flushes, cooking, bathing?
There is no instantaneous, its stored hot water for number 2
Is this for hot water or cold water in general? number 3
number 4.......not a clue.
Me and the custard have agreed on a 300 litre unvented hot water cyl ( enough to accomodate his self and wife, children when they come home from uni)
Thanks