M
mscg
Is it usual , on a gravity fed micro bore heating system to only have a drain off at the back of the boiler. All the rads have flow and returns at one end of rads and none have drain points.
I need to remove one rad and plumb in a new towel warmer,there is an extension in which a rad is plumbed in 15mm - should I take a spur off this or extend the microbore(about 2m)
Cheers
I need to remove one rad and plumb in a new towel warmer,there is an extension in which a rad is plumbed in 15mm - should I take a spur off this or extend the microbore(about 2m)
Cheers
