Hi
I have a dornbracht thermostat shower installed and the thermostat has stopped working (temperature does not adjust). I did some research and I see it could be lime scale build up.
After watching the videos of other brands I tried to dismantle the thermostat to remove and descale the cartridge. I know I need to isolate the thermostat from the mains but I can;t see how to do it.
I posted some photos of what it looks like:
There are two 10mm allen key heads that look like they could be the valves but they don't move in either direction (I didn't want to apply too much force).
I think this is the thermostat:
xTOOL Concealed thermostat module without volume control 1/2" -
Any help appreciated.
Assuming I can isolate the mains, any idea how to remove the thermostat cartridge?
thanks
Mark
I have a dornbracht thermostat shower installed and the thermostat has stopped working (temperature does not adjust). I did some research and I see it could be lime scale build up.
After watching the videos of other brands I tried to dismantle the thermostat to remove and descale the cartridge. I know I need to isolate the thermostat from the mains but I can;t see how to do it.
I posted some photos of what it looks like:
There are two 10mm allen key heads that look like they could be the valves but they don't move in either direction (I didn't want to apply too much force).
I think this is the thermostat:
xTOOL Concealed thermostat module without volume control 1/2" -
Any help appreciated.
Assuming I can isolate the mains, any idea how to remove the thermostat cartridge?
thanks
Mark