Help! | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter big al
  • Start date
  • Replies 5
  • Views 2K

Discuss Help! in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

big al

Helped my neighbour replace an old single rad(approx 30yrs old) for a new double rad, had to alter old pipework to fit new valves. So drained down the sysyem, altered pipe to suit new rad refilled the system and bled the rads. Switched on heating all come on fine and went off ok, but when the water gets heated the rads upstairs come on???????

What is the cause and how do i fix it please.:confused:
 
not too sure on the type of system, cant find a diverter valve in the airing cupboard, and it never used to do it before
 
if its a gravity hw, pumped heating system.
sounds like the gravity check valve is stuck open.
 
Last edited by a moderator:
finally got round to changing the gravity check valve, but the rads still come on upstairs when the hot water heats up....????
 
Status
Not open for further replies.

Similar plumbing topics

A simple thing i'd probably check is the...
Replies
9
Views
1K
  • Question
Red circles show my new AAVs and the manual...
Replies
17
Views
2K
My In-laws lives in Scotland Perthshire (I'm...
Replies
0
Views
747
Yes I’d do that too, just shut the radiator...
Replies
5
Views
871
Replies
9
Views
988
Back
Top