Hi! My nickname is Glow and am a new member! | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Hi! My nickname is Glow and am a new member! in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
1
I have just had a new Worcester Bosch gas boiler fitted i.e. not combi by a professional firm! However I have noticed that when I put the heating on, two of my radiators in my living room seem to each have cold spots one side! None of the other six radiators in my house have any cold spots! I have tried bleeding them but does not seem to make any difference! Appreciate any advice on this! Thanks
 
Turn half the good ones off do the problem two heat up evenly?
 
Welcome along matey. Was the system flushed? Could just be an air lock. If you have trv’s on the rads turn them off put the heating on and open one of the ones that is not working to see if it clears it then do the other one.
 
Hello Glow,
Welcome along.

You could try shutting all rads which are heating in full to force the heat through the rads which have cold spots.
 
Status
Not open for further replies.

Similar plumbing topics

There could still be 22mm pipework left...
Replies
5
Views
646
I once had a similar experience with my old...
Replies
6
Views
856
A decent water pressure and flow will be...
Replies
4
Views
1K
thank you very much - i will see if i can find...
Replies
4
Views
707
C
I’m not posting here to agree to do/looking...
Replies
1
Views
805
Back
Top