- Messages
- 17
Need to put a standard inch 1/4 waste grating in a stainless steel tray, was thinking to use a 38mm hole saw then chamfer the edges so it sits right , what size hole would you advise ?
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter Captainflood
- Start date
- Replies 3
- Views 1K
-
- Tags
- size
Discuss Hole saw size in the Plumbing Jobs | The Job-board area at Plumbers Forums
- Status
- Messages
- 3,128
Or take waste into merchants to size up new saw
- Status
Similar plumbing topics
- Question
If you measure the internal dia you should be...
- Alicia
- UK Plumbers Forums
- 1
- 602
- Latest:
- ShaunCorbs
- Question
Depends on the basin but I normally do 100mm...
- mutley racers
- Bathroom Advice
- 10
- 1K
- Latest:
- fowlerboi
- Question
Yes as above just watch your ods
- JonesJ89
- Showers and Wetrooms Advice
- 7
- 1K
- Latest:
- ShaunCorbs
- Question
Hello, I am just catching up on some threads...
- dreikher
- UK Plumbers Forums
- 1
- 552
- Latest:
- Lou
