Honeywell stat advice | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Honeywell stat advice in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
51
Can someone recommend me a simple to use remote thermostat?
Preferably a Honeywell.
Thanks in advance
 
honeywell t3r
 
What's the difference? (Never had a stat so forgive my ignorance)
One is a thermostat that will work alongside a programmer, the other is a room thermostat where you can programme different temperature set points through the day, eliminating the need for an additional programmer.
 
Last edited by a moderator:
The latter sounds like what I need, can you recommend one?
The only Honeywell stat Ive installed in a long time was the lyric t6r, nice thermostat but not the simplest of stats to use. If you want to stick with the Honeywell then I'd trust the opinion of Shaun and Chris. If you just want a simple to use stat then I can recommend these
Neomitis Wireless Digital Room Thermostat - RT0 RF | Digital Room Thermostat | PlumbNation.co.uk very easy to use and install. However, as you have to remove the boiler cover to wire the stat into the boiler, you will need a gas safe engineer to install it for you.
 
t4 is a programmable room stat eg timer and stat in one
t4r "" "" "" "" "" but wireless

t3 is a room thermostat
t3r "" "" " " but wireless
 

Similar plumbing topics

You can probably get a Drayton kit but just...
Replies
1
Views
2K
Deleted member 120897
D
Unsure about pipe stat which pipe is one will...
Replies
7
Views
846
  • Question
Thanks, the installer had linked a permanent...
Replies
14
Views
2K
  • Question
Topic has recently been discussed here...
Replies
1
Views
1K
Hello everyone, thanks for getting back to me...
Replies
4
Views
2K
Back
Top