Honeywell V4600A and C | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Honeywell V4600A and C in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Millsy 82

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,350
Can these be swapped the V4600A is exactly the same valve as the V4600C but the difference is the C is slow opening so it takes 30secs to get up to main flame and also the A is around £130 and the C is £60.

I cant see anything wrong with replacing an A with a C but just wondered if you are allowed to do it.
 
They are ecer so many boilers but the 1 where I came across the A valve was on a Ideal wrs 240.
 
The Mexico's and like used the V4600A and the Bermudas used the V4600C.
Unless the manufacturer gave advice to this you would not be permitted to swap these around.
 
Status
Not open for further replies.

Similar plumbing topics

Thanks that definitely seems to be the...
Replies
2
Views
1K
  • Question
OK thanks for the response. I hadn't...
Replies
5
Views
840
Should have added in, naturally there will be...
Replies
3
Views
1K
N
Hi,did you fix intermitent L-F ? I have same...
Replies
9
Views
3K
Mikesin
M
I have a home with an oil boiler in a garage...
Replies
0
Views
698
Back
Top