Hoses and connectors for water softener

[Renard]

I am a householder installing a replacement water softener and would like to get a good water flow through the hoses and connectors.
Ideally, I would like to use 3/4" hoses with 3/4" elbow (90 degree) threaded connectors that do not reduce the water flow. The only connectors I can find have a small hole - I would like to get full bore flow.
If not 3/4" hoses, at least 3/4" connectors with full bore that I can fit to the usual washing machine type hoses.
Please does anyone know where I can get such hoses and / or connectors?

 

[rpm]

Stick to the MI`s and do what they say.

 

[Renard]

Stick to the MI`s and do what they say.

Thanks for the advice, but the instructions do not specify any hoses or connectors. They just say connect to water supply. I spoke to their technical bloke who said it is OK to do as I am suggesting, their water softener will take the flow.

 

[Chalked]

Good old google!
This is a good price too.
Water Softener High Flow Hoses Installation Kit for High Pressure Systems

 

[Renard]

Thanks, Chalked. I did find those hoses during my own Googling (!) but didn't know whether the connectors reduced the flow. Perhaps best if I ring them during office hours.
I would only need the 900mm hoses. Is £45 really a good price? Seems a helluva lot!

 

[snowhead]

Most 1/2 " washing machine hoses are 8mm internal.
They're also not mainly WRAS approved and will taint the water.

Stainless Steel Braided Hoses 3/4" (22mm) For Water Softeners & Water Filtration: Amazon.co.uk: DIY & Tools

£25.99 plus £5.00 del.

 

[king of pipes]

Most water softner manufacturers can supply a a high flow kit which softner do you have ?

 

[Renard]

Most water softner manufacturers can supply a a high flow kit which softner do you have ?

I bought it from water2buy. By coincidence they are a supplier of the hoses mentioned by snowhead, which I am going to buy. Many thanks to all for your advice.