Hi guys.
I have a newish (4 years old) hot water cylinder with 2 immersion heaters fitted.
It has worked fine but yesterday when switching it on it tripped a rcd. I have disconnected the mains from the element put it in terminal strip and tried the switch again and it doesn't trip so I would guess at the issue being within the immersion.
Could this be the thermostat or is it likely to be something else. Thanks in advance
I have a newish (4 years old) hot water cylinder with 2 immersion heaters fitted.
It has worked fine but yesterday when switching it on it tripped a rcd. I have disconnected the mains from the element put it in terminal strip and tried the switch again and it doesn't trip so I would guess at the issue being within the immersion.
Could this be the thermostat or is it likely to be something else. Thanks in advance