Advice please,
I am trying to work out what size holes etc are required for pipes to fit through, I am looking at having a unvented hot water cylinder fitted and just wanted to know what size pipe would be used to the hot outlets. I know I need 22mm to the cylinder but not sure what size I need from the cylinder. If you are using mixing taps does the cold supply need to come after the pressure reducing valve or can you take it from the mains and fit check valves to both pipes.
I am trying to work out what size holes etc are required for pipes to fit through, I am looking at having a unvented hot water cylinder fitted and just wanted to know what size pipe would be used to the hot outlets. I know I need 22mm to the cylinder but not sure what size I need from the cylinder. If you are using mixing taps does the cold supply need to come after the pressure reducing valve or can you take it from the mains and fit check valves to both pipes.