How do I connect to this ground toilet pipe.

[Nicholas Lambert]

Underfloor pipe. How do I connect? The pipe is made of pot I think and it’s broken. My flexible toilet pipe won’t go into it properly. It’s 10cm in diameter. Thank you in advance.

 

[king of pipes]

You can purchase a adaptor which will get you from the hep sleeve pipe to standard 110mm plastic pipe. Kop

 

[Aquarius]

Either what @king of pipes has suggested or something like an extension A multikwik with a 90 bent multikwik (2190) or if it's possible a long tail 90 bent multikwik.

 

[moonlight]

I agree with king of pipes, but trim the clay pipe so it is fairly level.

 

[Nicholas Lambert]

Thanks guys. Yes just been into a plumbers merchant and they sold me that exact thing. I’ll also trim the pipe level. Thanks again

 

[Ben-gee]

Looking at the damage to the clay pipe, I think the drain adaptor will bottom out before it makes a good seal.

I would go with Aquarius’ suggestion and use a mcalpine pan connector extension, followed by a 90 degree pan connector. The extension has a longer section of fins, however it may still be necessary to carefully excavate around the clay to allow a good connection to be made.

Think of it as an archeological excavation rather than a builder’s one, go steady....