how do i deal with this? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter REDSAW
  • Start date
  • Replies 11
  • Views 216

Discuss how do i deal with this? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
R

REDSAW

went to my nephews new house today to do some wet plumbing, i asked if he had got a new safty check done and he had, 2 days ago.

well i couldnt help taking a look for myself as the gas fire had been a.r'd as it had no closure plate into an open brick chimney with a 4' x 1' coarse of brick taken out as a 'feature' above the fire place exposing the cavity!!!.?.

fair enough it had been made safe and labelled.

but it is this what caught my attention bellow that had been passed and it is exactly as found apart from opening the door, there is a wooden wedge bottom right of casing and a wing nut missing of the heat ex cover.....

what should i do as i am still not got my g.s.reg through yet?.
 

Attachments

  • Photo-0013.jpg
    Photo-0013.jpg
    89.3 KB · Views: 12
  • Photo-0015.jpg
    Photo-0015.jpg
    84.9 KB · Views: 12
  • Photo-0014.jpg
    Photo-0014.jpg
    85.1 KB · Views: 12
Last edited by a moderator:
have you payed for your GS ? phone them up and request ur reg number and license number as it can take some time to get your card but can't see the pics
 
no, my papers are still in the verification stage at the moment (only passed last week). so i am on the 2 week wait before the 3 week gsr wait.lol.
= no mans land.

knowing what to do between here and then.... not got a clue.
 
your probably not living by me or i would pop round and id it for you cant see your photos either but from your description red it sound highly dubious get a gs mate in if you can and go from there,or lie get your nephew to ring transco smell of burning fumes etc they will take one look and go from there
 
no, my papers are still in the verification stage at the moment (only passed last week). so i am on the 2 week wait before the 3 week gsr wait.lol.
= no mans land.

Hopefully it won't be that long, matey. Three weeks from elements to certificate arriving in the post. Registered with GS on a Saturday and Monday AM had my welcome email.
 
Couldn't tell you! Got a welcome email, am on the register, but nowt in the post yet.
 
carnt see any pics red, also i would proberly id it anyway or cap the gas off cos if by the time you get ye stuff thro which takes about 2 or 3 weeks mine did and owt happens they,ll still blame you
 
Status
Not open for further replies.

Similar plumbing topics

Worked a charm, thanks a lot Shaun!
Replies
6
Views
1K
Yes, all that was in place. Just had no idea...
Replies
7
Views
234
Break it off or fix it permanently. It will be...
Replies
4
Views
163
Good stuff, yep I can’t totally relate to...
Replies
7
Views
2K
Sharp Point
S
  • Locked
Thanks @Jones82 I’ll be sure to mention when...
Replies
2
Views
1K
Back
Top