edit: found the way to connect the hose to the regular tap.
Dear everyone,
I am trying to figure out how to add pressure to the boiler. I've read the manuals online and this is what I found:
Dear everyone,
I am trying to figure out how to add pressure to the boiler. I've read the manuals online and this is what I found:
- Connect filler hose to cold water tap and fill hose with water until no air bubbles present.
- Connect filler hose to filler/drainage tap below appliance.
- First open cold top and then filler/drainage tap.
- Fill appliance/system until water pressure is between 1 and 2 bar (when cold).
- First close filler/drainage tap and then cold water tap.
- Bleed system after filling.
Last edited: