how to connect secondary return pipe for hot water? | Bathroom Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss how to connect secondary return pipe for hot water? in the Bathroom Advice area at Plumbers Forums

bluesky

Gas Engineer
Messages
132
dear all, sorry for this silly question,i am not good at plumbing really, still at training, i am going to convert a conventional boiler to a combi boiler, there is a secondary hot water on the side top, i am thinking to just connect it with hot water from top of the old cylinder, is this ok? i dont quite know how secondary hot water works to be honest,

cheers in advance
 
Last edited:
i had the fast track training, i did spent 3 month in trainging center on plumbing, maybe they did mention this kind of open vented cylinder, but missed this part because my english is not so good, sorry for disturbing you if this is too silly question..
 
No No No No No.

Just leave it alone until you have enough training and experience to actually know what you are doing.

Think of the words of wisdom that Alexander Pope once wrote - "A little learning is a dangerous thing"
 
3 month course. !!!!!!

Your more qualified than half of the "plumbers" on here.

Only seems to be a few of us who have completed an actual apprenticeship
 
I don't think any wind-up merchant would actually post that as they would think it would be far to unbelievable for anyone to be duped by. By my logic it's gotta be genuine! :nonod:
 
Maybe I've missed something but I'm slightly confused...you say you are in training yet in a previous post (hw doesn't work without central heating) in this forum you installed a megaflo & baxi system boiler. Are they GSR trainees now??
 

Similar plumbing topics

  • Question
That will be fine then no air problems 👍
Replies
12
Views
2K
  • Solved
Thanks for the comments fowlerboi. Like you I...
Replies
7
Views
435
B
  • Question
Well, I'm thinking if your HOT OUT goes in a...
Replies
14
Views
2K
  • Question
take iso valves off and fit 1/2 inch x 22mm...
Replies
5
Views
767
  • Question
There was a single tap causing the issue. We...
Replies
2
Views
653
Back
Top