How to connect two pvc pipes small space | General DIY Plumbing Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss How to connect two pvc pipes small space in the General DIY Plumbing Forum area at Plumbers Forums

Messages
2
20221009_025320.jpg

Help needed for a DIY-er. I lifted my floorboard one night at 2am after a month of not knowing where my leak was coming from. I've numerous holes in my living room ceiling and had 3 different plumbers out from different companies unable to find the problem and all charging me for doing other things which had nothing to do with the leak 😣
This seems to have been a problem the previous owners had as it had been patched up... i replaced the elbow joint with a push device which seems to be holding but the problem is this middle section (there was an old connector leaking so i removed it). A push connector wont work as you can see its too small a space and the floorboard wont go down again. I bought a straight connector but its 21.5mm and the pipe is 22mm so it doesnt fit.. I cant seem to find any connectors that arent bulky which will fit the pvc pipe together. Thanks in advance
 
Is it an overflow pipe serving just that lavatory which is in the picture?

If so I would remove that pipe entirely and have the lavatory overflow going down the pan, either via the drop valve or syphon depending on what type it is - and then fit a blank plug into the old overflow hole.

If you show a photo of the cistern including where any pipes are joined to it, and one of the inside of the cistern - we can confirm this and tell you how to do it.
 
Hi, thanks for your replies. It was leaking badly this morning at the corner push-fit section, so my plumbing skills have definitely failed.

Interesting. I'll have to work out if it is the toilet overflow. Would that make sense to flow into the water tank. I was convinced it was the toilet as I dyed the water blue (with food colouring) and the water leaking was blue! I'm now reading about the float valve and washer and water pressure, seems a lot to get my head around.

Thanks for your plumbing input. Have learnt much more on these forums and online.
 

Similar plumbing topics

A
  • Question
It's likely 3/4" in pipe not 22mm. You likely...
Replies
1
Views
747
  • Question
Only way to find out as above mcalpine make...
Replies
2
Views
795
  • Question
It was just a thought. I had the experience of...
Replies
16
Views
2K
Hi @Jim Goodenough I do have some yes , I did...
Replies
2
Views
780
D
  • Question
No problem, thank you for the advice. I admit...
Replies
11
Views
1K
Back
Top