How to increase pressure on Worcester 30 HE | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss How to increase pressure on Worcester 30 HE in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
36
My pressure is below 1 bar when cold. The manual just says "increase the pressure by doing what the installer showed you". Great.

on other boilers there have been some easy to adjust valves to do this. But I'm not 100% sure on this boiler. Any suggestions please?

Thanks
 
there should be some valves in your airing cupboard
 
Ok thanks. I've found a tap handle on one of the pipes in the airing cupboard. I assume I open this to increase the pressure? Seems odd that I can't see the gauge whilst doing it
 
its usually a little black handle on quarterturn valve 'usually' its on a flexi braided pipe..
turn it a little, check the gauge, repeat until satisfied.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Hi Chuck the engineer said I have replace all...
Replies
2
Views
734
  • Question
How high is the hill 40m as that will add 4...
Replies
2
Views
499
  • Question
Yes, I have this as well. I called a plumber...
Replies
6
Views
1K
Pritesh Patel
P
  • Question
This might be of interest...
Replies
1
Views
595
More than fine then in 11/5 tube should be...
Replies
3
Views
674
Back
Top