How to tighten this toilet seat? | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss How to tighten this toilet seat? in the Boilers area at Plumbers Forums

Messages
2
Hello - I have a loose toilet seat but no obvious ways to tighten it. I have looked all over the Internet and I have tried various things that have been recommended.

I have looked for buttons to release it, I've tried lifting the metal caps to try rotate them, I've tried removing the little plastic caps but all to no avail.

I've attached photos of how it looks and am tearing my hair out in frustration!

Any help would be much appreciated!
 

Attachments

  • 20211129_184740.jpg
    20211129_184740.jpg
    131 KB · Views: 30
  • 20211129_184748.jpg
    20211129_184748.jpg
    158.3 KB · Views: 24
  • 20211129_184756.jpg
    20211129_184756.jpg
    96.9 KB · Views: 20
  • 20211129_184806.jpg
    20211129_184806.jpg
    119.9 KB · Views: 21
Try putting lid and seat up and holding them pull upward to remove, then you can remove the metal shrouds from the fixin, probably a screw head underneath the shroud
 
Two little "inserts", or something removable here and here (outlined in red)??
push them, lever them out, or are they just moulding lines?

Once you get the seat off, that will give you a chance of tightening the fixings as above

EBD343BE-A8C9-4D76-9B69-AE7162C59AB6.jpeg
 
Last edited:
Two little "inserts", or something removable here and here (outlined in red)??
push them, lever them out, or are they just moulding lines?

Once you get the seat off, that will give you a chance of tightening the fixings as above

View attachment 66637
That worked! Thank you so much, I removed those plastic bits which let me lift the seat off, move the metal covers and tighten the screws.

Thanks to you both!
 

Similar plumbing topics

You will see to holes at the back one each...
Replies
1
Views
538
Welp right after posting this I got the seat...
Replies
1
Views
953
A
Is it the type with 2 grub screws that wind in...
Replies
2
Views
889
S
Pull the screw up whilst you untighten it.
Replies
2
Views
849
Pop the chrome bezel off if you see where the...
Replies
1
Views
268
Back
Top