i need a price on | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss i need a price on in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
D

deano1984

hi we need a price on a drain down the systen with about 14 rads ,turn off gas ,shut off stop tap and pad lock
plz let me know
thanks deano
 
I'd say your selling yourself a bit short there.I'd need at least 5K maybe £5300.Sounds like a complicated job.Lots of teeth sucking needed too.
 
Drain down & Service shutdown.....................£
location of stop tap.....................................£
take all meter readings and meter locations......£
sump pump ensure this is isolated and left working...........£

ok give me average quotes for the above jobs please
 
Last edited by a moderator:
Drain down & Service shutdown.....................£
location of stop tap.....................................£
take all meter readings and meter locations......£
internal and external rubbish removal.................£
including flammables - tenance belongings...............£
sump pump ensure this is isolated and left working...........£

Someone give me average quotes for the above jobs please
Q/ How long is a piece of string?
A/Twice as long from the middle to the end.
This is a job that only you can price.Maybe you could get rubbish in a tesco carrier bag?Maybe you need 20 4ton skips???Tennants belongings?Was it Imelda Marcos with thousands of pairs of shoes?
 
Drain down & Service shutdown.....................£
location of stop tap.....................................£
take all meter readings and meter locations......£
sump pump ensure this is isolated and left working...........£

ok give me average quotes for the above jobs please
 
I have a bit of difficulty pricing jobs as well and this forum is excellent for advice etc. (not wanting to start a debate about whether advice should be given etc.) I also learn an awful lot from reading other peoples questions and problems and the answers.

One thing that I've noticed is that no one wants to give advice on pricing, I think the variables are too great for an accurate price.

The people who have been given answers regarding prices have published what they think they should charge and just need a bit of clarification.

Although, I'm not the best one to give this advice on price, I would put down what you would charge and you may get a more understanding response.
 
Thats where I'm going wrong, very very very wrong, I throw in the bondage for free, I only charge when I wear my mask.....
 
Status
Not open for further replies.

Similar plumbing topics

Me too. One pipe at a time, wet vac to hand...
Replies
4
Views
632
  • Question
Did you leave it an hour to heat up ?
Replies
4
Views
541
  • Question
We just charge it by the hour like everything...
Replies
1
Views
127
  • Question
Hi Santhosh. I recommend you get a G3 plumber...
Replies
1
Views
404
Back
Top