Ideal 30 Low Water Pressure

[jsm]

Hi
Removed radiator from wall for decorating, then refilled and bleed all Radiators.
System now saying low water pressure
Boiler saying
1. Fill System to 1 bar.. although after topping up now showing 1.5bar
2. Bleed radiators - done all
3. Contact Installer!!..
Is there anything i can do check before calling out plumber?
Thanks

 

[oz-plumber]

What sometimes helps is give the boiler a right or left hand hook.
Sounds like a pressure switch problem.
Th hook may fix it

 

[jsm]

Good idea, didn't work!!
Plus got no hot water

 

[oz-plumber]

Fill more water into system.
You could either have a faulty pressure gauge or a faulty pressure sensor or both.
Keep adding water slowly until something happens - or until water passes through the pressure relief valve.
If it gets to the stage of passing through the relief valve you have a problem that you cannot fix - you need professional help to remedy the problem

 

[ShaunCorbs]

Turn it off and back on again ? (Power)

 

[Stu-B]

Might want a reset (plus random 5th word)

 

[jsm]

Hi Done all of the above but to no avail. Sitting at 2bar and no hot water and no pilot light either

 

[Sharp Point]

If the pressure gauge is under the boiler, tap it with handle of a screwdriver and see if the needle drops back round to zero