Ideal classic rs40 | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ideal classic rs40 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

lolipop

Gas Engineer
Messages
129
Hi guys ,I am having problems with this boiler intermittently going off I ve changed usual suspects ,thermo c,overheat stat,it's looking like the gas valve solenoid ,my question is can you change the solenoid or is it a new gas valve ,?..
 
I would look at why switch live is energising first. Could be a problem outside the boiler, or you mean cutting out before it reaches temp?
 
Last edited:
I think this prehistoric old girl is ready for the 'Pearly gates'. Tis time to move on.....
 
Sorry I was a bit vague "going off" pilot light goes out and cust says it takes a while to relight ,I've called out and pilot lights ok but found I ve got to ease grey button fully out ,also cust says he can hear a buzzing noise then boiler lights on main flame ,hence the question on the solenoid ?
 
Solenoids do buzz some times but work perfectly fine...Has it got an interrupter via a pipe stat?
 
Yes it does ,it has a small cylindrical type sensor which fits in a dry pocket in hex which connects to a small red pop out stat then a short interrupter lead from stat to thermo c ,the stat had not popped out but something is cutting gas out
 
Status
Not open for further replies.

Similar plumbing topics

I once had a similar experience with my old...
Replies
6
Views
955
In what way has the 3 port and pump been tested?
Replies
2
Views
952
Deleted member 120897
D
D
Cadet will cap the gas due to the smell of gas...
Replies
1
Views
593
Your sensitivity, arrogance and ignorance are...
Replies
11
Views
2K
I would agree, but only if the high stat were...
Replies
4
Views
1K
Back
Top