Ideal icos heat only 24he power fault

[king of pipes]

Went to this boiler monday for a FL fault the condense pipe was blocked cleared that stripped it down a did a full service all ok, thursday pm phone call boiler has no power , went to have a look internal fuse ok, power in to control box and up to pcb but thats it no lights on control box anyone had this one cheers kop

 

[ShaunCorbs]

was it the ones with the wires on the trap?

 

[Harvest Fields]

Is that the one where the user display plugs straight into the pcb or is it on a lead?

 

[king of pipes]

No shaun this one mate its probably the pcb but theres 2 one in control assembly and one primary PCB renowned for failing time to get multimeter out regards kop

 

[Gasmk1]

Could be expensive as manufacturer advise to change both pub and user interface.

 

[Harvest Fields]

Chances are that it is just the main PCB

 

[ShaunCorbs]

My vote new boiler

 

[Harvest Fields]

My vote new boiler

All day long mate. But would be at least a month before I could fit it in.

 

[king of pipes]

Could be expensive as manufacturer advise to change both pub and user interface.

Thats what i feared may go reconditioned national boiler spares 1 year warranty both for £100ish thanks bud kop

 

[ShaunCorbs]

Don't ideal do a fixed price repair on this of around 200 ?

 

[king of pipes]

Not had alot of use shaun was in a holiday home which was their second home so hardly used , now sold on so cant really push a new boiler on them looks brand new grrrr . cheers kop

 

[king of pipes]

Will give them a call bud .

New board £187 ooch!

 

[Harvest Fields]

Will give them a call bud .

New board £187 ooch!

Worth a shout. Out of all the icos/isar boards I have changed I have only ever fitted 2 x user interfaces

 

[ShaunCorbs]

Will give them a call bud .

New board £187 ooch!

Yep it's one boiler I won't repair parts are hella expensive ideal fixed price or new boiler

Went to one and phoned ideal up they fixed it ended up with nearly a new boiler new heat ex and fan and pcb (fan took the pcb out)

All for under 300

 

[king of pipes]

Changed the main pcb and all is ok now the boilers in good condition so a few years left in it cheers for the info. Kop

 

[Lambed84]

Have a lot of these on my patch. Board and interface change atleast 1 a week.
Boards are tempremental, usually took out by an underlying problem.
Hopefully you've cured it tho in sorting the condensate

 

[townfanjon]

Great boilers , I look after loads of them

 

[king of pipes]

You home town? they are all good till they go wrong ha ha bit over the top on price for parts as shaun said the fan can take the board out but fingers crossed i wont see it for another year . kop

 

[townfanjon]

You home town? they are all good till they go wrong ha ha bit over the top on price for parts as shaun said the fan can take the board out but fingers crossed i wont see it for another year . kop

Nearly pal , about half way down France , tunnel booked for teatime , so hopefully back late tonight , I havnt been on this week because we have been in the middle of nowhere in Italy. Seriously those icos' s are ok , theres not a lot goes wrong with them compared to other boilers . You can pick up boards for £90 ish.

 

[king of pipes]

I look after a few and not as bad as people say but when the board fails and theres no indication of the fault ie some sort of fault code then can get expensive if you miss diagnose the problem hey ho its all work. Have a safe journey home mate regards kop