Ideal Isar He24

[acmgas]

Hi all,

I am looking for a compatible pump head if one is available .

The pump on the boiler is a MP61.

boiler Gc no.47-348-31.

serial number vy20071300133149.

The boiler has been fitted 300mm of the floor so looking for a easy option rather than change the whole housing.

Any advise would be great.

Thanks Mark

 

[snowhead]

Pumps : Ideal Evo, Isar Pump Kit 170990

 

[acmgas]

Thanks.

Just checked that out ,Does that come with the kit so you dont have to change the whole pump?.

Thanks Mark

 

[snowhead]

Looks like it depends on the serial number of the boiler as to which pump is fitted and which solution is needed, either full pump or new head.

Looks like you need 177147,complete pump as your boiler VY ****serial no. is prior to XF **** and you have an MP61

 

[Dotty]

Moved off open forum.

 

[acmgas]

Thanks for the advise
Looks like a new pump and housing then

 

[armourer]

Im a bit late seeing this one. The MP61 heads are obsolete and ideal say to replace the manifold too but you can fit a standard system wilo pump (isar).

You use the new pump head and spacer but reuse the existing slimmer securing bolts from the MP61. This will save you changing the manifold.

 

[acmgas]

Thanks for your reply.

That will come in very handy if I ever get one again.

I ended up finding a place that did reconditioned pumps did not want to change the housing due to the location of the boiler.

Thanks mark