Ideal istor immersion heater | Plumbing Jobs | The Job-board | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Ideal istor immersion heater

Post thread

Discuss Ideal istor immersion heater in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
T

Tommyn

Hi Fokes, wondered if anyone knew the best way to change the immersion on an Ideal Istor HE325. The immersion has decided to start leaking from the seal and needs replacing. Unfortunatley it looks like a right arse to change. Just wondering if anyone has much experience with these?
 
Status
Not open for further replies.

Similar plumbing topics

G
  • Question
Leaking cylinder around immersion heater
There's no leaks anywhere above it. The water...
Replies
3
Views
364
Gilesda
G
C
Lower flow temperature in vented HWC w/immersion heater weekly cycle?
Newly bought home has somewhat older plumbing...
Replies
0
Views
909
combedcloud22
C
E
Immersion heater problems!
Is it an unvented cylinder? Sounds like issue...
Replies
3
Views
1K
SimonG
SimonG
C
Hot tank with two immersion heaters
so if you already have and use E7 then it...
Replies
6
Views
2K
Murdoch
M
J
  • Question
Repair or replace - advice
the gas valve might just need resetting
Replies
5
Views
1K
ShaunCorbs
ShaunCorbs
Back
Top