Ideal Locgic Combi 30 - Leaking Filling Loop (whilst trying to repressurise)

[bakertreek]

Hello - i am trying to repressurise the boiler as its now at zero pressure. When connecting the filling loop (which is quite short and has a braided pipe), I then turn the filling loop isolation valves to the open position, and water leaks from both taps (blue and black). There is no sound/pressure going into the tank, because the water leaks out.

Any suggestions? The pipe is short, slightly twisted and difficult to attach to the isolation valve - is there a washer missing or some other part which causes the water to leak and not go straight in?

Help Please

Natasha

 

[Scott_D]

There should be a rubber washer both ends, look in the blank caps

 

[Cainan]

Even if it was leaking which many do have drips from if not tightened on properly it should still pressurise. Tighten on a bit more, put a basin underneath and open both valves fully and shut off when you get to 1 - 1.5 bar