Ideal logic+ 30 - Overheating/cutting out?

[macka3]

Hi just wondering if anyone can shed any light on an issue i'm having with my boiler..

Initially started i think after i came back of holiday and the pressure was low on my boiler after topping up everything was fine and boiler operated as normal. A day or so after however i started noticing that my boiler was cutting out before the thermostat reached room temperature. It then keeps on coming on and cutting out continually every 2-3 mins before room temp is reached. I have bled all radiators and all of them heat up fine. No issue with hot water this runs fine.

Any advice is much appreciated

Thanks

 

[garygvl]

what heating programmer do you have

 

[macka3]

what heating programmer do you have

Hi its a boss therm brtrf with its corresponding br1 receiver.
[automerge]1579448701[/automerge]

what heating programmer do you have

Hi its a boss therm brtrf with its corresponding br1 receiver.
[automerge]1579448734[/automerge]
Hi its a boss therm brtrf with its corresponding br1 receiver.