Ideal Logic Plus 24 | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Ideal Logic Plus 24 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

merv

Plumbers Arms member
Plumber
Gas Engineer
Messages
86
Hi, I attended a Ideal Logic Plus 24 today and although there was no fault code, the DHW was reaching a max of 52 degrees. Looking at the service book it doesn't have a DHW thermistor. Can anyone please tell me what regulates the temperature? Thanks
 
Did you have the tap open fully? I'd say with the tap wide open on a 24kw boiler at this time of year 52 degrees would be quite normal? Try slowing the flow from the tap to see if you get an increase in temperature.
 
Status
Not open for further replies.

Similar plumbing topics

Hi Lou, It's been the same since 19th May...
Replies
6
Views
639
T
time to save up and get a baxi 800 range
Replies
5
Views
2K
Is your boiler the 'Ideal Logic Heat 12' (i.e...
Replies
1
Views
835
W
Hi cjg, thanks for the reply. It was serviced...
Replies
2
Views
1K
Williams25
W
Back
Top