Ideal mini 24 problem? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ideal mini 24 problem? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
N

no1keeper

Hello all...happy new year to you!!

I have been asked to look (favour),at an ideal mini 24 boiler fault....now,for the last 15 year i have only worked on commercial appliances so have little experience with domestic boilers....the problem is this.......the boiler fails to start up in the morning (in either ch or dhw demand)...however,when the boiler is turned on and off 2 or 3 times the boiler will then fire and then be ok for the rest of the day,cycling quite happily.The same happens again at night when it is due to come on again in auto(boiler turned on and off several times until it fires,then ok)......The clock is ok,as when the boiler is due to fire,the boiler attempts to work (i can hear the 2 way electronic actuator moving (have taken the actuator off and can confirm it is driving ok,up for dhw and down for ch).
Any ideas would be greatly appreciated:confused:
very many thanks
 
Status
Not open for further replies.

Similar plumbing topics

Are you Gas Safe Registered? If not please...
Replies
2
Views
621
Hi Lou, It's been the same since 19th May...
Replies
6
Views
794
S
Boiler Fault I’m hoping someone can help with...
Replies
0
Views
189
S
"While zone 2 is running if I turn up the...
Replies
4
Views
717
Hi It's a combi boiler so yes. Unless there...
Replies
2
Views
888
Back
Top