Ideal pan connected to a Sani slim | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ideal pan connected to a Sani slim in the Plumbing Jobs | The Job-board area at Plumbers Forums

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,156
Fitted one of these as a last resort and guess what won't even clear 2 sheets of paper let alone a turd any recommendations guys personally think I need couple more litres flush at least so think of changing the internals in the cistern?

20181020_110901.jpg


20181016_163104.jpg


20181016_163031.jpg
 
Sometimes too much water (rare these days I know) creates a big swirl in the pan with little water going through the spigot picking up the waste matter as it does.
Rough guess in seconds how long between flush and the motor kicking in? And I`m sure a man of your calibre has pan spigot lined up with pump inlet yeah?
 
Yes mate you know I had my resignations about fitting this cistern internals only deliver 4.5 litres max flush then pump kicks in works fine it's the pan thats at fault , pm me your mobile I will what's app you a vid bud are you now in Norwich ? Will have to meet up got some work there in a couple of weeks . Cheers kop
 

Similar plumbing topics

Was the new pan fitted with a flexible waste...
Replies
1
Views
667
You may also find pushing the button sharply...
Replies
14
Views
2K
Okay I’ll give it a try, thanks for your replies.
Replies
9
Views
3K
Thanks, I shall take a look in that case and...
Replies
21
Views
3K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
1K
Back
Top