Ideal standard designers

[townfanjon]

Look at this belter , its a safe bet the ***head who designed this has never fitted a bath in his life .

 

[ShaunCorbs]

Yep end up using a deep seal trap (75mm and a small 10mm extension ) normally to get past them if you can get away with the height

 

[SimonG]

Lot of baths like that now.

 

[ShaunCorbs]

Bit of uni strut might get you out of trouble as it’s strong but thin

 

[Deleted member 32524]

Make your own beam and hole saw?

 

[snowhead]

Well it worked alright on the test rig in the factory...

 

[townfanjon]

Strangely my first bath this year **** for brains idea.

 

[centralheatking]

Plastic baths are uck,bend deflect ..move and seperate from the tiles whatever you do.pressed steel all the way I replaced all the baths in my gaffs with pressed steel ...7 in total never looked back
...make sure no metal plugs tho...just rubber ones
centralheatking