Identify taps please?

[Paul Cockhill]

Hi, can anyone identify these taps? I need to replace the washers on them but am having trouble taking the heads off. I am not sure if you can pull the heads off or they are screwed down. It feels like it might pull off but I am worried about damaging them.

Any help gratefully received

Paul

 

[Paulplumb]

I seem to recall the top metal disc above the brass bit on the handle unscrews

 

[JCSPLUMBING]

I think paulplumb is right they unscrew. I replaced some recently. I'm think they are bristan taps if my memory serves

 

[Paul Cockhill]

Thanks Paulplumb and JCSplumbing

 

[Ray Stafford]

I'm think they are bristan taps if my memory serves

I was going to say Deva, but quite a lot of suppliers made that "mixage" look for a couple of years.

 

[REDSAW]

ideal caradon 'millenium' taps range with plastic splines in the head.

you can get replacements.


errr, yeh, they should just pull off, but the plastic might break if there old!.

 

[Gray0689]

Jacuzzi do ones like that too

 

[Best]

Ideal Standard do taps like that & the round chrome top bit screws off to reveal a tapered headed brass screw that holds the head tight. But they tend to be ceramic disc quarter turn works.