Identify these taps Please.

[PaulGarrod]

Can anyone identify these taps? They are leaking and I can find no way to get at the cartridge. There are no grub screws. The pix show the whole kit plus 2 closeups 1 with the rear collar slipped off. Thanks in advance.

 

[sammathias]

Forgive me if im.wrong but does the centre part covering the spindle wind out for you to be able to get a spanner on the threads?

 

[PaulGarrod]

Hi, Thanks for the response. My assumption was that the part nearest the wall should be restrained with a boa wrench or similar and the other, equal sized part in front of it wound out. Otherwise the grouting would be damaged. But. I didn't want to try this out without trying to find out if this was correct. In the end I might just have to have a go. trouble is if I do break something I don't know where to look for a replacement.

 

[PaulGarrod]

Managed to sort it thank you. All VERY tight, but solution as above.

 

[plumbandplumber]

Ah, stillsons are your friend.