Identifying a multi fuel burner

[JamesyGoosey1]

Does anyone recognise this what I believe to be a multi fuel burner from the pics enclosed, can't find no info on the unit it's self

 

[Ermintrude]

Looks a cheap one efel?

 

[JamesyGoosey1]

I'll have a look on net for them ermintrude see if I can see it

 

[JamesyGoosey1]

Can't see anything that looks like it I can't believe how difficult they are to find no data plate or nothing on it. I'd hate to be doin repairs on these day in day out would take a age!

 

[Ermintrude]

What u need badge for? U service and repair?

 

[JamesyGoosey1]

What u need badge for? U service and repair?

No pal it's just in a house I've bought n wanted some info on it pal that's all

 

[Ermintrude]

No chimney plate then? Id would be writing to solicitors! Half a job!

Empty it out and clean burn box seep chimney . Is it lined? Looks like a double burn unit.

 

[Ermintrude]

Be worth getting on roof and checking liner, old gas bbu removed stove tied in with ex liner and pot?

 

[JamesyGoosey1]

Think I'm just gunna rip it out pal if finding info about it is anything to go by then it's more hassle than it's worth!

 

[Ermintrude]

Multi fuel be fine / not much to go wrong just check flue

 

[stani]

Get a good local sweep in, clean and ask for a smoke pressure test, if it's bad rip it out if not, say thanks to the vendor for saving you money installing a multi fuel burner.
if the sweep is a member of NCA (I think) most can camera the flue as well

 

[JamesyGoosey1]

Cheers for the heads up stani n ermintrude I think the Handel is missing or the tool for closeing the door so could do with finding out the make to get one ordered

 

[stani]

Heat Resistant Wood Burner Burning Multi Fuel Stove Gloves Gauntlets Welding Aga | eBay



cheaper option!

 

[Ermintrude]

Or bit of brass square rod with handle

 

[JamesyGoosey1]

Haha like it I'll get some ordered lol

 

[JamesyGoosey1]

Think there's something missing here too apart from fuel ha

 

[Pipes Plumbing]

Yep, fuel retaining bar has gone for a wander and the rear fire brick is on its way out.

Looks a little like a Silverdale that I came across recently that someone had knackered with house coal. It should really have a data plate on it if it was ever an approved appliance...
It would be worth starting to budget on a replacement if it is showing signs of wear and you don't know the make / model to source spares.
Some great stoves out there for not a vast sum of money now.