If a radiator has no TRV - what does it need instead? | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss If a radiator has no TRV - what does it need instead? in the UK Plumbers Forums area at Plumbers Forums

Messages
91
Hey

Sorry for the very basic question! Just putting my Screwfix shopping order together. We'll be putting a radiator in the bathroom and don't want that to have a TRV. So what does it have instead? A lockshield on both sides?

Any recommendations on what to get for a Stelrad Compact?

Many thanks
 
Thanks chaps.

I've just had a rummage and found a couple of these:


IMG_20211011_185452792.jpg

To demonstrate my ignorance even further.... They're lockshield valves aren't they? If so, the piece on the right - is that part of it? I have two valves, but only one of those pieces.


Or a manual radiator valve (essentially similar valve).

If this ends up being the only radiator without a TRV - i.e. the always on rad - would a manual valve still be an option or best to have two lockshields?

Thanks for the help
 
Either or, it doesn’t matter. Yes what you’ve posted a photo of is a lockshield, and the piece to the right is a radiator tail, the threaded part screws into radiator and then the nut and olive tighten down onto the smooth part.
 
No idea what happened to the other radiator tail then but never mind... I presume the plumber can just re-use the tail from the radiator he is replacing? Or else might have one on the van?

Or is it better to use decent quality lockshields? These ones are Plumb Centre Tradefix / Wolseley... That being said, the central heating is back up (main heat is from wood burners).

Thanks for all the help with this.
 
That valve will be fine.
Most lockshields, including that one, can operate as a manual valve too - the only difference is the white plastic cover. For a lockshield it doesn’t engage with the valve spindle, for a manual the centre of the inside of the cover engages with the valve spindle and allows it to be turned.
 

Similar plumbing topics

  • Question
Here is a photograph to peruse.
Replies
3
Views
681
  • Question
Would need to see the valves but if they look...
Replies
4
Views
2K
  • Question
Closing the loop... I replaced the valve body...
Replies
6
Views
2K
    • Like
  • Question
Yes perhaps it has moved it. As for...
Replies
7
Views
5K
  • Question
Your more than welcome let us know the outcome...
2
Replies
32
Views
4K
Back
Top