hot water working fine. On central heating the burner lights for 1 second then goes out, after the usual 3 attempts it goes to ignition lock out. Told low pressure setting on the GV could be wrong will check this out. Any other ideas if this does not work tomorrow
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Ignition problem main 24he band b in the Plumbing Jobs | The Job-board area at Plumbers Forums
- Status
D
diamondgas
That's Weird! I'd be quizzing the custard a bit then thinking about condensate ..... TBH 
- Status
Similar plumbing topics
I'm not sure h changed any diaphragms. He...
- keyplayer
- Central Heating Forum
- 10
- 1K
- Latest:
- keyplayer
Unfortunately the fitting of a new Venturi did...
Can I have your gas reg number please so I can...
- apick62
- Central Heating Forum
- 1
- 676
- Latest:
- ShaunCorbs
Thanks some good ideas. Just as an aside if we...
- FozzieBear
- Central Heating Forum
- 10
- 2K
- Latest:
- FozzieBear