- Messages
- 4,106
Hi Friends
So, after having no drain tee on a combi tank I put the hosepipe down the cold internal feed and sucked, hey presto after a couple of goes it started to drain, all 100%.
Now, after fitting the new immersion and thermostat (that is already fitted) and wiring the other bits up I turned it on. Nothing, been sitting here half hour and water still cold.
There is electric going to and from and I've changed the fuse in case. Still nothing!!!
Any comments?
Should I wait longer?
Cheers
Rct
So, after having no drain tee on a combi tank I put the hosepipe down the cold internal feed and sucked, hey presto after a couple of goes it started to drain, all 100%.
Now, after fitting the new immersion and thermostat (that is already fitted) and wiring the other bits up I turned it on. Nothing, been sitting here half hour and water still cold.
There is electric going to and from and I've changed the fuse in case. Still nothing!!!
Any comments?
Should I wait longer?
Cheers
Rct