Immersion size - help

[Old Account]

Hi lads,

just wondering if if anyone could could tell me what size immersion I need for boost and off peak ?

Current immer name Heatre stadia / superloy 2 - 2.3/



What would you guys do regarding the asbestos gasket ?
Also the bottom wire were burnt ...


kind regards
ron

 

[Old Account]

 

[Chalked]

Replace with an incaloy 12 inch immersion

 

[stani]

3kw immersion needed and replace the flex with heat resistant flex of 1.5mm and make sure the connections are screwed up tight.

 

[Old Account]

3kw immersion needed and replace the flex with heat resistant flex of 1.5mm and make sure the connections are screwed up tight.

Hello Stani,

You mean 1.5mm heat resistant wire ?

I will leave this to the electrician who will come anyway as he completely connected the economy 7 wrong.
However, regarding the seals which are asbestos ... just take them out in a safe back ? Where shall I dispose those ones ?

Thanks for your help

Kind regards,

Ron

 

[Old Account]

3kw immersion needed and replace the flex with heat resistant flex of 1.5mm and make sure the connections are screwed up tight.

Hello Stani,

You mean 1.5mm heat resistant wire ?

I will leave this to the electrician who will come anyway as he completely connected the economy 7 wrong.
However, regarding the seals which are asbestos ... just take them out in a safe back ? Where shall I dispose those ones ?

Thanks for your help

Kind regards,

Ron

 

[Old Account]

Replace with an incaloy 12 inch immersion

Hi Paul,

Thanks for your help appreciate it a lot ... top man

 

[joni os]

Plume centre doing incoloy, Tesla TIH540 on special offer £16.79 .

 

[stani]

Hello Stani,

You mean 1.5mm heat resistant wire ?

I will leave this to the electrician who will come anyway as he completely connected the economy 7 wrong.
However, regarding the seals which are asbestos ... just take them out in a safe back ? Where shall I dispose those ones ?

Thanks for your help

Kind regards,

Ron

Yes, wire/flex 1.5mm will suffice but make sure it is heat resistant, the bit between your fixed cables to the immersion is wired in a flexible cable.but your sparks should know.
Regarding the gasket, I'm not sure I remember these being asbestos, but for the size I would wrap it in a bag and dispose of as you see fit.