Last summer I used one of those kits to fit an external tap , all went well , still good , its one of those flexi pipe , self cutting tap jobs , doesnt leak , all seems good, However , I would like to increase the pressure , I know those self cutters only cut a very small hole in the copper pipe ,
Is there any reason that I cant take that off and replace it with a compression joint directly to hose then to the tap , I know how to do it but im not sure whether those self cutting taps are fitted for convenience or if im missing something , the reason im doing it is that I want to use the outside tap for a pressure washer and the pressure with the self cutting tap it ridiculous ( it did say "not suitable for pressure washers" on the box to be fair"
Is there any reason that I cant take that off and replace it with a compression joint directly to hose then to the tap , I know how to do it but im not sure whether those self cutting taps are fitted for convenience or if im missing something , the reason im doing it is that I want to use the outside tap for a pressure washer and the pressure with the self cutting tap it ridiculous ( it did say "not suitable for pressure washers" on the box to be fair"