URGENT INSTALLATION & SERVICE DUST SHEETS

[KBrewin]

Hi Guys,
I run my own firm and always struggle to find good dust sheets like the British Gas ones.
Heavy cotton in a colour other than cream with company logo at a decent price is all I’m after!!
So I’ve decided to source and make my own version and just wanted to get a idea if people would be interested in heavy cotton dust sheets with or without company logo.
3 sizes. service sheet , installation sheet and stair runner.
let me know you thoughts.
Thanks.

 

[townfanjon]

URGENT !!!!!

 

[john the plumber]

Hi Guys,
I run my own firm and always struggle to find good dust sheets like the British Gas ones.
Heavy cotton in a colour other than cream with company logo at a decent price is all I’m after!!
So I’ve decided to source and make my own version and just wanted to get a idea if people would be interested in heavy cotton dust sheets with or without company logo.
3 sizes. service sheet , installation sheet and stair runner.
let me know you thoughts.
Thanks.

No

 

[ShaunCorbs]

Depends how safe they are as I never use a stair runner now after going down a set upside down

 

[Aquarius]

Depends how safe they are as I never use a stair runner now after going down a set upside down

What do you use Shaun? Roll and stroll?

 

[ShaunCorbs]

What do you use Shaun? Roll and stroll?

nothing prefer just to clean up afterwards

 

[EvilDrPorkChop]

nothing prefer just to clean up afterwards

Bit risky isn't it? 😛

 

[ShaunCorbs]

Bit risky isn't it? 😛

risky either way you could slip/ trip and break your neck

just gaffa any open ends drain

as for rads flip them over providing you put the air key /plug back in

 

[Aquarius]

as for rads flip them over providing you put the air key /plug back in

Yep, or close rad valves both ends and separate via inlet nuts. Or another preferred method, use male end of compression stop ends.

 

[Jim Goodenough]

Yep, or close rad valves both ends and separate via inlet nuts. Or another preferred method, use male end of compression stop ends.

Unless they're 3/4" union type.

 

[EvilDrPorkChop]

risky either way you could slip/ trip and break your neck

just gaffa any open ends drain

as for rads flip them over providing you put the air key /plug back in

I meant more like if you were doing a bathroom job etc.

 

[Aquarius]

Unless they're 3/4" union type.

Ahh, that’s where my pre-made 3/4” x 1/2” tap connector with a blank cap on the end come in handy 🤓

 

[ShaunCorbs]

I meant more like if you were doing a bathroom job etc.

normally use the big yellow tubs and carry to the skip so other than a bit of dust there’s nothing that a quick Hoover each night can’t solve

 

[Jim Goodenough]

Ahh, that’s where my pre-made 3/4” x 1/2” tap connector with a blank cap on the end come in handy 🤓

Or keep a couple of 3/4" union valves in the van, and make sure theyre closed!