installing drinking water fountain, double check valve? | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss installing drinking water fountain, double check valve? in the Bathroom Advice area at Plumbers Forums

Messages
910
I have a drinking water fountain to fit, Is a double check valve needed on the supply? Also are they usually piped up in the small bore plastic I have seen them fit with before presuming this comes with it?
 
depends on type im guessing its internally?

something like this?

wall-mounted-drinking-fountain-with-undershroud-773.jpg


or is it like the bottle type?
 
normally hard pipe (15mm) and no check valve is needed but always good to fit a double
 
thank you. the double check valve advisable. Encase someones mouth touches the spout?

excatly or someone tries to fill a cup up on it
 
What age ?

And normally ask / look around the school if there's any others
 
Couple of options basin height or 1m or what ever height there happy with
 
Be careful about guessing this one. You need to consider the need to make such facilities 'Accessible' to wheelchair users, etc. these days. I don't know all the rules I'm afraid but better to check before you install.

Normally fit a second at kid height too low of adults to use
 

Similar plumbing topics

C
  • Question
Is there a ball valve on the flexihoses? Might...
Replies
1
Views
949
  • Question
The ones I use haven’t had a problem but it’s...
Replies
5
Views
434
  • Question
I have a ROS small faucet for drinking water...
Replies
0
Views
645
  • Question
Also I don't think he'll be able to get a bit...
Replies
12
Views
2K
  • Question
This design must be peculiar to the...
Replies
1
Views
551
Back
Top