Installing hive thermostat | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Installing hive thermostat in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
15
Good evening guys. I need some help fitting my new hive thermostat. First of all, I understood the hive thermostat requires at least 3 wires. I opened my old thermostat and I tried to see which cable is it but I couldn't understand. Can you help me with this?
Please find the picture attached. Thanks a lot!

IMG-20181120-WA0000.jpg
 
You can't fit the hive there as it needs a permanent live, the transmitter is usually fitted near the boiler, using a permanent live from the fused spur. You could connect the existing switched live near the boiler and use that as your call for central heating. This would disconnect the wiring to your existing thermostat seen in the picture, you would then remove this and fit the battery operated hive receiver over the existing hole.
 
So you have had help. But had no help?:D:D Just messing with you. I think that you should really get a heating engineer out.
Please don't take this the wrong way but if you are asking this I don't think you should be touching it ....best you consult either a heating engineer, or a spark who does central heating systems .
As I also stated above. I agree.
 

Similar plumbing topics

Hi, I am trying to link a Hive heating & hot...
Replies
0
Views
649
Glad you managed to get things sorted out in...
Replies
3
Views
776
  • Question
Great cheers 👍🏻
Replies
4
Views
842
Brilliant. All up and running. Thanks for...
Replies
2
Views
1K
  • Question
Best to ask hive
Replies
1
Views
655
Back
Top