Instant hot water tap | General DIY Plumbing Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Instant hot water tap in the General DIY Plumbing Forum area at Plumbers Forums

Messages
578
One of my daughters has been persuaded that she needs one of these instant hot water taps when she gets her kitchen done out. Oh dad is not too bad at £900. I replied by saying you can get a damned good kettle for £900.
As she is on her own and out most of the day I do not see the point in having one of these. Anyway let us surmise she goes for one are there any ones you would recommend, or not recommend.
Thanks
 
Oh..what a coincidence.
I have 3 sitting in the back of the van, that I pulled out today.
She can have all 3 if she pays for postage.

Age: 3 years old.
History: Barely used due to malfunctions / breakdowns.
2 were working fine that I removed
Owner of office building where he rents out rooms to businesses for meetings.
Limited hot water, so if you have more than 4 people who want a hot drink at one time - you're in trouble.
6 offices over 3 floors, 1 kitchen per floor.
He bought 6 kettles - 2 for each kitchen to replace the units removed.

He also told me what the hot water taps cost initially and what he has spent on repairs.

Astounding amounts of money when compared to the cost of a kettle
 
I rest my case m'lud but will she listen. I will put it to her but like a lot of youngsters everything has to be new. All I could do to get her to accept a towel radiator that was hard to distinguish from new.
Can I be nosey and ask the makes of the taps? I am not sure how many are fitted into domestic premises versus commercial, maybe the lastest fad.
 
I have never been involved in a long lived successful installation.

They are rubbish.

I’d be interested to know in any of the high-ups in the companies that make them have them fitted in their own kitchens . I suspect not, or not for long anyway.

I now refuse to fit them, always push my customers away from them; new customers that have already bought it- I walk away.
 
Never fitted one but I have encountered a few. I can't see the point myself.

If she is youthful enough, can you not convert her to a kettle using some modern psychology like the Carbon footprint argument? Surely it is better for the environment and her pocket to boil a cup full of water for a brew?
 
I have never been involved in a long lived successful installation.

They are rubbish.

I’d be interested to know in any of the high-ups in the companies that make them have them fitted in their own kitchens . I suspect not, or not for long anyway.

I now refuse to fit them, always push my customers away from them; new customers that have already bought it- I walk away.
They are rubbish can you elaborate?
 
I am assuming it is still a requirement for unvented DHW cylinders to be regularly inspected. Would it not be the same for one of these? I see on Quooker videos they make a point of it being pressurised and holding the water at 110 deg C
 
I do a lot of work for a kitchen/building company and they push the Quooker taps, that retail around £1k! They look reasonable quality but obviously we only fit them, we don't maintain them. As you say they are under pressure and heated so require a PRV and associated waste pipework which comes with the setup and is easy enough to fit.
I have also fitted the Bristan one which appears to be an open vented type container and vents through the tap, essentially when you want boiling water the tap pushes cold down into the unit and the boiling water comes up. If I had one at my house I would prefer this setup as if it fails you only get a leak of whatever volume the unit is, say 3 ltrs. Whereas the Quooker is a mains fed unit before the tap, hope that makes sense.
My big concern with all of them is there's a lot of flexible braided pipework which after a period of time can cause issues.
 

Similar plumbing topics

  • Question
Plate to plate Sorry to say gas engineers job
Replies
2
Views
847
  • Question
You Can Use Boiler, Heat Pump.
Replies
3
Views
566
  • Question
What a good idea.
Replies
11
Views
1K
  • Question
Thankyou, I have already installed a hot and...
Replies
13
Views
832
Back
Top