Intergas or ATAG | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter rab250
  • Start date
  • Replies 1
  • Views 3K

Discuss Intergas or ATAG in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
R

rab250

This has probably been asked before but i am trying to find my top end boiler what i can offer to my customers. I have fit a few intergas & i Like them alot but i also read good reviews on the ATAG,is there anyone who has experience with both boilers and what do they prefer.
 
Good luck if you go the Atag route. We had one installed and had lots of problems with it. Several different heating engineers and Atag's own UK office were unable to diagnose the fault -- and unwilling to replace the boiler -- so we were forced to repace it in the end. Huge waste of money.
 
Status
Not open for further replies.

Similar plumbing topics

Sorry. My sloppy language. I mean you press...
Replies
7
Views
1K
S
    • Optimistic
  • Question
As above the boiler is not faulty the...
Replies
2
Views
826
Cheers Shaun, as you can probably guess, he's...
Replies
5
Views
2K
Bumping this in the hope that more comments...
Replies
6
Views
3K
No the support chap had a look at the pipes...
Replies
14
Views
2K
Back
Top