Is there a programmable stat that can also do immersion heater? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Is there a programmable stat that can also do immersion heater? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
5
Hello,


Looking for help with finding a suitable controller.
Customer has oil Aga for central heating and hot water - simple enough. However over the summer months it gets shut down and any heat requirements are met by wood burner and hot water is produced electrically via cylinder immersion as they have a large solar array.


What the customer is after is an all in one programmable room thermostat with effectively 3 channels - heating, hot water and immersion heater hot water control.
I don't think such a product exists but would love to be proved wrong.

Many thanks

James
 
I don't think so the immersion is wired separate on it's own RCD and double pole switch. Not a 3amp switched fused spur the boiler and its controls run off. You can get immersion timers however but will be separate to the rest of the controls.
 
Yes and no you could run one in tandem with a 30 amp contactor

But have a word with a sparky
 
Status
Not open for further replies.

Similar plumbing topics

G
So the bottom looks like it’s connected - but...
Replies
3
Views
955
Murdoch
M
https://www.tanks-direct.co.uk/files/pdf/pdf303...
Replies
8
Views
991
E
Is it an unvented cylinder? Sounds like issue...
Replies
3
Views
1K
so if you already have and use E7 then it...
Replies
6
Views
2K
Murdoch
M
  • Question
Thanks. It’s pretty powerful. At least 3...
Replies
15
Views
2K
Back
Top