S
Saahil
Hello guys,
This is my first post so apologies in advance for any of my ignorance.
I have got 2 vented 105 litres in-direct hot water cylinders installed, out of which I would like to isolate 1 to save cost in heating both. All I wanted to know if the steps below are right to isolate it.
1. isolate cold water feeding the 2nd hot water cylinder at gate valve.
2. isolate the hot water rising from the 2nd hot water cylinder with a gate valve.
3. Isolate the boiler flow feeding into the 2nd hot water cylinder with a isolating valve, I cannot isolate the return back from the 2nd cylinder due to its location, is it a problem? What valve is best to isolate the boiler flow into the cylinder?
Please advise.
Thanks in advance.
regards.
This is my first post so apologies in advance for any of my ignorance.
I have got 2 vented 105 litres in-direct hot water cylinders installed, out of which I would like to isolate 1 to save cost in heating both. All I wanted to know if the steps below are right to isolate it.
1. isolate cold water feeding the 2nd hot water cylinder at gate valve.
2. isolate the hot water rising from the 2nd hot water cylinder with a gate valve.
3. Isolate the boiler flow feeding into the 2nd hot water cylinder with a isolating valve, I cannot isolate the return back from the 2nd cylinder due to its location, is it a problem? What valve is best to isolate the boiler flow into the cylinder?
Please advise.
Thanks in advance.
regards.