its the plumber !!!!! | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss its the plumber !!!!! in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,703
It was the plumber in the study with the blow torch !!!!
Well thats what it feels like somedays or today,had a call back on system i fitted couple months back so of i toddle to the job where upon arrival i am greeted with two rads upstairs dont work response from building supervisor.Upstairs i go try vent all fine ,trv's open check pin all good . Try lockshield and both are shut , now i know these were open as i checked myself and knew all rads hot plus builder before pass over checked rads and knew they were hot .
Told the cust that someone had shut them and she replied well it needs balancing and boiler commissioning as read it on the net , BRILLIANT HERE WE GO!!!
I then proceed to show her benchmark showing gas rates etc , told her that the baxi does a pre commission check prioir to fire up and then proceded to prove temp to each rad was relavent as well as getting analyser out and proving combustion was good .
still not satisfied she then points at a light saying what about that where is my bulb ? also i have a socket that you have wired wrong !!

my reply

erm i am the plumber thats electrics

her reply

well i still wanted it sorted out


WHY WHY WHY do we bother !!!!
 
Did she get her commission and balance idea from that "plumbers forum UK"
 
builder must have loaded up the bile so much so she got really not happy about it ... have promised my self no work for builders again as when there is a middle person between me and the client there always is a issues ... hope you dont let it getting you
 
Its actually not the builder for once its the actual cust whom all the build work was done for . They have a so called specialist who is advising , as they say a little knowledge is dangerous
 
Dont you just love it when the specialist comes along, proberly works for B&Q or the local fish & chip shop, I know all about it I fitted a Garden tap !!
 
This job would be great if it wasn't for the public. There's always something to spoil it..
 
if you want proper mayhem get involed in a job with an architect an interior designer and a customer who is a feng shu addict every fecker had a reason for where each rad should go 8 rads took nearly all day to get the positions sorted
 
Status
Not open for further replies.

Similar plumbing topics

I feel for you, it's a bad position to be in...
Replies
18
Views
2K
  • Question
Have you got any updates on this?
Replies
1
Views
822
The old adey ones had the same problems the...
Replies
1
Views
165
There is 6 pipes under the boiler and one goes...
Replies
19
Views
970
  • Question
Get yourself a more helpful engineer with the...
Replies
10
Views
2K
Back
Top