Just had combi boiler serviced and now i`m losing pressure fast | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Just had combi boiler serviced and now i`m losing pressure fast in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
17
Had combi boiler serviced today 4pm pressure dropped half a bar in an hour i`m topping it up but keeps losing it, there was no problems whatsover before this.
Boiler is a Sabre which i beleive is a Vokera.
I can`t see any signs of water loss, what could they of done to it ?
Also they said couldnt give me a certificate as my gas meter has 2 anaconda pipes fitted, Is this true?
Thanks
Kev
 
I`ve tried but must be shut, will call in the morning.
Are they right about not giving me a certificate because of meter?
 
He should still have issued a certificate if he is gas safe, if it was a risk he should have given you a defect notice and taken appropriate action, as far as I am aware as long as the meter is secure dual anacondas are not an issue
 
Yeah I'd say call the engineer in the morning...

I serviced a boiler last week & topping up the pressure to 1.5 bar was enough to pop the expansion vessel!
 
Had combi boiler serviced today 4pm pressure dropped half a bar in an hour i`m topping it up but keeps losing it, there was no problems whatsover before this.
Boiler is a Sabre which i beleive is a Vokera.
I can`t see any signs of water loss, what could they of done to it ?
Also they said couldnt give me a certificate as my gas meter has 2 anaconda pipes fitted, Is this true?
Thanks
Kev

Had this exact issue the other day. If your meter is on a bracket then it's fine
 
Probably deflated expansion vessel via PRV , been unlucky on the refill maybe.
Unsure why never gave you a cert tho .
 
Pressure goes straight upto 1.5 quickly
The the link to the ad on wowcher says,

Get a full boiler service.
Plus a gas analysis and landlord's CP12 certification.
Valid for all domestic boilers.
Helps maintain the efficiency and economy of your boiler.
Friendly and experienced engineers.

So i`ve paid for a full service.
 
Meter is fixed safe and securely with bracket to the wall. Its a pre pay meter had a fault with it 2 years ago and was replaced by British Gas the engineer happily changed it over without any mention of it being a problem.
 
Meter is fixed safe and securely with bracket to the wall. Its a pre pay meter had a fault with it 2 years ago and was replaced by British Gas the engineer happily changed it over without any mention of it being a problem.

Then they don't know the regs. I didn't I hold my hands up but that's why I found out.
 
He worked on the boiler for about 10 mins max, took off the casing then unscrewed a panel on the front there was dust a few spiders and a bee in there he vacuumed the crap out with his vacuum didnt notice him do anything else, his mate asked me to show him the meter then he said cant give me a certificate because meter should only have one anaconda, i took there word for it as i didnt know.
Yeah i know the wowcher thing but i`d contacted other companies and got nowhere so went the wowcher route,yes you get what you pay for but they seem like a reputable company on the net atleast
 
He worked on the boiler for about 10 mins max, took off the casing then unscrewed a panel on the front there was dust a few spiders and a bee in there he vacuumed the crap out with his vacuum didnt notice him do anything else, his mate asked me to show him the meter then he said cant give me a certificate because meter should only have one anaconda, i took there word for it as i didnt know.
Yeah i know the wowcher thing but i`d contacted other companies and got nowhere so went the wowcher route,yes you get what you pay for but they seem like a reputable company on the net atleast

Did you check their gas safe ID?
 
He worked on the boiler for about 10 mins max, took off the casing then unscrewed a panel on the front there was dust a few spiders and a bee in there he vacuumed the crap out with his vacuum didnt notice him do anything else, his mate asked me to show him the meter then he said cant give me a certificate because meter should only have one anaconda, i took there word for it as i didnt know.
Yeah i know the wowcher thing but i`d contacted other companies and got nowhere so went the wowcher route,yes you get what you pay for but they seem like a reputable company on the net atleast

Wow just 10 minutes!!
 
No i didnt check there ID i should of.
wowcher was £35 yes sounds cheap but i use wowcher alot for deals hotels days out etc and do save lots of money so didnt see me having a problem
 
How long should they of been here for in your opinion, should they of took off components valves etc apart to test and clean etc ?
So they 100% should of given me a certificate?
 
Status
Not open for further replies.

Similar plumbing topics

the op says no water in prv balloon so not prv...
Replies
7
Views
1K
Again, ongoing thanks. I'll have to get to my...
Replies
18
Views
2K
K
Either pipe blocked or expansion vessel too small
Replies
2
Views
1K
thank you, good tip, I will try
Replies
3
Views
1K
P
  • Locked
Doesn't matter, mod will remove or close it.
Replies
3
Views
842
Back
Top