Kane 455 - co reading high after purged | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Kane 455 - co reading high after purged in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

beesley121

Hi guys,

had my kane 455 calibrated on the 3.4.2014, I've only used it a few times since and today have found that after a purge, co levels hover around 15ppm, it won't go any lower no matter how long I leave it on.

i guessing this needs to be fixed, I've had a problem with this unit before and I was fixed under warranty when it was calibrated. It's only 15 month old

can I get I fixed under warranty again, should think for the money I've paid that it shouldn't have broke 2 so quick
 
Is it the latest 455 with the dedicated co sensor?
Their Northern service centre no is 01942 873434
Southern is 01707 384834
 
Have you left it in the van ? i ask cos my cheaper kane gets mardy even left in humid warm conditions (van on rainy summer days) believe it or not. not just cold. Usually get weird co2 on mine.Sent it back 3 times and when it gets there it behaves..
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
No , nothing to compare with other than...
Replies
3
Views
2K
Many thanks for your reply. I have checked the...
Replies
2
Views
860
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
911
HRP123
H
Well that's true. It's easy to sit here...
Replies
10
Views
3K
Back
Top