Kane KAL1 air and liquid temp probe | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Kane KAL1 air and liquid temp probe

Post thread

Discuss Kane KAL1 air and liquid temp probe in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
Scott_D

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,128
As above, its brand new, and came with my new Kane 455 set.
I dont need it so £22.50 delivered:smug:
 
Status
Not open for further replies.

Similar plumbing topics

D
  • Question
Frost protection valve, detect air or water temp?
But they don’t drain the system so can still...
Replies
3
Views
465
ShaunCorbs
ShaunCorbs
A
  • Question
Samsung Air Source Heat Pump
Hi George, The normal temperature of the...
Replies
11
Views
8K
Ant87
A
R
  • Question
Low Co ppm after Kane 455 service
No , nothing to compare with other than...
Replies
3
Views
2K
RayPlumb
R
M
  • Question
Expansion Vessel leaking water - no air or water from Schrader valve?
Duff expansion vessel, get them back out...
Replies
2
Views
2K
SimonG
SimonG
T
  • Question
Shower Pump on air to water Unvented Cylinder?
Ya, they said the fact the anti-vibration...
Replies
6
Views
713
thegrizzlyone
T
Back
Top