Kerosene to gas oil

[Bunker]

One of my good custards, a farm, has just bought a second hand hot air blower for the tractor shed. The mechanics are putting the flue in (high!). The burner is an ElectroOil job, the orange one and has a 1.75 60s nozzle. They want to run it on red diesel. What do I re- jet that too and what pp? Can I use my FGA on it, if so what results should I be looking for?
Thanks fellas.

 

[Dotty]

Knock the pump pressure up to 12 bar and your nozzle down to 1.35/60s.

Should give you roughly the same output.

Smoke gun before fga you'll be fine.

 

[lame plumber]

He is such a good bloke is John, also knows a bit bout oil, commercial as well Wish he was looking over my shoulder today

 

[Dotty]

He is such a good bloke is John, also knows a bit bout oil, commercial as well Wish he was looking over my shoulder today

You're being nice ....

You're never nice.....

What are you after?

 

[lame plumber]

just bemoaning the bleedin boiler that is haunting me at present

also living in fear, the number plate on her car where I am working tomorrow is -- 5ECXY, only issue being she thinks she is, but she isnt, fake blonde, ***** pelmet, too much mascara and around 63!!!!!!!!!!!!! rather scary to be honest

 

[Bunker]

just bemoaning the bleedin boiler that is haunting me at present

also living in fear, the number plate on her car where I am working tomorrow is -- 5ECXY, only issue being she thinks she is, but she isnt, fake blonde, ***** pelmet, too much mascara and around 63!!!!!!!!!!!!! rather scary to be honest

Sounds like a right old boiler..

 

[lame plumber]

funnily enough when she got a real soaking today, she improved a lot